Used to reinforce and equalise the absorbability of mineral bases inside and outside buildings. The preparation should be diluted according to the manufacturer's guidelines. Thanks to the very good penetration ability, it can go really deep into flaking bases, contributing to their reinforcement. Can be used to equalise base absorbability before finishing works take place, such as: luting, wallpaper laying, painting etc.
Packaged in 10, 5 and 1kg containers.
Use a painting brush, masonry block brush or roller to apply. Incorrect diluting may hinder subsequent works. When priming the base before painting, the preparation may be tinted with a small amount of “target” paint (max. 20%). The preparation should be diluted in accordance with guidelines printed on the package.
Show moreUse the preparation on dry bases only. Do not use on surfaces that are hot or exposed to strong sunlight. The base temperature during the primer application and drying should be between +5°C and +30°C. The optimal application temperature is +20°C. The drying time depends on temperature and base absorbability and is usually, between 1 and 3 hours. Enclosed spaces should be aired until the characteristic smell is removed. Surfaces exposed to contamination should be secured and any stains be removed before drying.
Information contained in the manual help ensure the optimal use of the product, however, it does not create any legal liability of the Manufacturer, due to the fact that the conditions of use remain outside of its control. We do not accept any responsibility if the material is combined with products from other Manufacturers.
