Used to glue and point panels, thresholds, ledges, decorative strips, cork, glass and mineral wool on bases made of wood, chipboard, plaster, brick, concrete, metal etc. It can also be used to glue and point natural stone slabs (marble, granite etc.), to seal various joints (including vibrating joints), to fill expansion joints, to glue mirrors, and to seal containers in cooling, processing, automotive and other industries. Can be used both inside and outside buildings.
Packaged in 290 ml containers.
Apply with a manual or pneumatic gun. In deep gaps, use a closed-cell backer rod. Avoid soiling of joint edges. In order to obtain a straight joint line, cover the surrounding area with a masking tape, which must be removed immediately after the joint has been processed. Joints should be smoothened with a soap solution, before skin is formed. Wash with painter’s naphtha directly after use.Show more
The temperature of the base and its surroundings during the application and drying should be between +1°C and +30°C. The specified processing times may vary under the influence of adverse thermal and moisture conditions. Areas exposed to soiling should be secured.
Information contained on the package help ensure the optimal use of the product, however, it does not create any legal liability of the Manufacturer, due to the fact that the conditions of use remain outside of its control. In order to avoid mistakes, check the suitability of the substance for the intended application, or ask the manufacturer for technical advice. Any attempts to change the composition of the product are not allowed, as they may considerably reduce its quality. We do not accept any responsibility if the material is combined with products from other Manufacturers.