Used to form internal coatings, manually or by spraying, acting as a protective and decorative means on the following bases: concrete, cement, cement-lime, gypsum plasters, drywalls, thin-layer mineral plasters etc. The paint creates fine-grained coatings with a gloss (matte, 850-5 to 10), resistant to wet brushing (class 2). It can also be used to cover already existing paint coatings for renovation purposes. Available in colours that can be found in Greinplast and NCS* colour scheme. Upon the customerâs request, other colour schemes are available.
Packaged in the following containers: 10l/15kg, 5l/7.5kg, 3l/4.5kg (white) and 9l/13.5kg, 4.5l/6.75kg 3l/4.5kg (colour).
Only after suitable preparation of the base and when it has completely dried off, the actual painting works may be commenced. In order to improve working properties, the manufacturer allows the addition of max. 10% of water. The volume of added water should be identical for each package. The paint needs to be agitated directly before its application. Apply one or two layers with a roller or high-pressure spraying unit. Works on a wall forming a single plane should be carried out in a continuous manner, following “wet on wet” method, using material from a single production batch without intervals.Show more
The ambient temperature during the paint application and drying should be between +5°C and +30°C. The optimal application temperature is +20°C. Enclosed areas should be aired until the characteristic smell disappears. Surfaces exposed to soiling with paint should be secured, and when soiling occurs, remove stains before they turn dry.
Information contained in the manual help ensure the optimal use of the product, however, it does not create any legal liability of the Manufacturer, due to the fact that the conditions of use remain outside of its control. We do not accept any responsibility if the material is combined with products from other Manufacturers.